Our expertise with large, industrial sterilization technology was packaged into the EHS, the fastest pre & post vacuum tabletop sterilizer. It is a hospital grade sterilizer ideal for outpatient or private clinics that wish to be independent of a CSSD (Central Sterilization Supply Department) for instrument processing, but do not want to compromise on results. It is also commonly used for Flash cycles in operating theaters.

Speed

The EHS is our fastest tabletop autoclave. This is achieved with a jacketed double walled chamber, which acts as an instant supply of steam and keeps the autoclave warm and ready for use. The powerful water-ring vacuum-pump provides for fast pre and post vacuum air removal.

Benefits:

• Designed to sterilize class B cycles - packaged, porous and hollow A loads.
• Rapid cycles increase the availability of ready-to-use sterile instruments.
• Manages large loads efficiently with a powerful vacuum pump
• Enhanced monitoring for consistent documentation of sterilization results
• Easy-to-use, single touch control system increases productivity

Double Wall:

Surrounding the chamber is a second wall, the jacket. The internal steam generator fills the jacket with steam when the sterilizer is first started. The jacket then acts as a steam generator and reservoir.

• Minimizes the time it takes for each individual cycle to come up to temperature and pressure
• Built to run continuously for 24 hours
• Improved temperature distribution in the chamber
• Reduces condensation and improves drying
• Improves chamber insulation and increases efficiency

Capacity
We understand that every clinic has different needs. The EHS is available in 23 Liters and 85 Liters chamber size. The 85 Liter model is designed for clinics that need a higher rate of instrument turnover. When used at full capacity this model significantly decreases the cost of instrument processing.

Features:

• Robust high-volume water-ring vacuum-pump for fast and efficient air-removal
• Dual-compartment water reservoirs with automatic filling and discharge:
• Mineral-free water reservoir for steam
• Tap water supply for the water-ring vacuum-pump
• Connection to water draining and to external mineral-free water supply for automatic draining and filling of water
• Stand-by heating mode keeps the autoclave warm and ready to use
• 316L type stainless steel chamber and door with electro-polish finish
• Control lock-out switch prevents starting a cycle if door is not properly locked
• Door protection device prevents door from opening at high pressure and high temperature
• Automatic safety shutoff prevents overheating of chamber